 | Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/2" Brand: IWS Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/2", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$25.09 |
 | Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 1/2" tube size Brand: IWS Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 1/2" tube size | *$12.45 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/16" OD. Brand: IWS SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/16", OD.0.68", Working Pressure 2250 PSI, Min. Burst Pressure 9000 PSI, Min. Bend Radius 4.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.23 Lbs., Reel Package | *$4.60 |
 | Male NPT Fitting With Spring, 1/2" Pipe Size, 3/8" Hose ID Brand: IWS Male NPT Fitting With Spring, 1/2" Pipe Size, 3/8" Hose ID | *$8.14 |
 | Carbon Steel Gear Clamps, Nominal Size 1-3/4" Brand: IWS Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 1-3/4", Min. Size 1.31", Max. Size 2.25", Pack of 10 | *$0.93 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 8.44" min. Size, 8.75" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$9.71 |
 | Male NPT Air Brake Insert 1/4" Pipe Size, 3/8" Hose ID Brand: IWS Male NPT Air Brake Insert 1/4" Pipe Size, 3/8" Hose ID | *$2.35 |
 | Air Brake Hose Assembly 3/8" NPT 3/8" ID 30" Long Brand: IWS Airbrake Assembly Hose 3/8" NPT 3/8" ID 30" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.19 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/4" Brand: IWS Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/4", Hose Size 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$15.78 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 1-1/4" Brand: IWS Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 1-1/4", Min. Size 0.75", Max. Size 1.75", Pack of 10 | *$1.13 |
 | Support Clamp Brand: IWS Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 13/16" ID, Pack of 18 | *$1.38 |
 | Silicone Coolant Hose, 13/4" Brand: IWS Silicone Coolant Hose, 1-3/4" ID x 2.12" OD, Working Pressure 55 PSI, 4 Feet Per Case | *$28.43 |
 | Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 1/4" tube size Brand: IWS Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 1/4" tube size | *$9.31 |
 | Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 1/4" tube size Brand: IWS Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 1/4" tube size | *$7.65 |
 | Reusable Hydraulic JIC 37 Degree Male Coupling, Thread Size 1·1/16-12" Brand: IWS Reusable Hydraulic JIC 37 Degree Male Coupling, Thread Size 1·1/16-12", Hose ID 5/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$27.45 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/8" Brand: IWS Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/8", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$6.27 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/4" Brand: IWS Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$10.69 |
 | Male NPT Air Brake Insert 3/8" Pipe Size, 3/8" Hose ID Brand: IWS Male NPT Air Brake Insert 3/8" Pipe Size, 3/8" Hose ID | *$2.84 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/2" Brand: IWS Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/2", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$14.91 |
 | Air Brake Hose Assembly 3/8" NPT 1/2" ID 56" Long Brand: IWS Airbrake Assembly Hose 3/8" NPT 1/2" ID 56" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$16.34 |
| | Air Brake Compression Nut, 1/4" Tube size Brand: IWS Air Brake Compression Nut, 1/4" Tube size | *$0.64 |
 | Carbon Steel Gear Clamps, Nominal Size 1" Brand: IWS Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 1", Min. Size 0.69", Max. Size 1.50", Pack of 10 | *$0.85 |
 | Support Clamp Brand: IWS Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1-1/8" ID, Pack of 22 | *$2.55 |
 | Silicone Coolant Hose, 23/8" Brand: IWS Silicone Coolant Hose, 2-3/8" ID x 2.75 OD, Working Pressure 40 PSI, 4 Feet Per Case | *$34.80 |
 | Air Brake Compression Male NPT Branch Tee, 1/8" Pipe Size, 3/8" tube size Brand: IWS Air Brake Compression Male NPT Branch Tee, 1/8" Pipe Size, 3/8" tube size | *$6.27 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 30" Brand: IWS SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 30" | *$92.75 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1-7/8-12" Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1-7/8-12", Hose ID 1-3/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case0.44 | *$93.04 |
 | Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 5/8-18" Brand: IWS Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 5/8-18"5/16", Drop Length 1.73" | *$28.33 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8" Brand: IWS Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$3.73 |
 | Push-To-Connect Air Brake Fittings, Union 1/2 Brand: IWS Push-To-Connect Air Brake Fittings, Union, Hose Size 1/2" x 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$11.47 |
 | Air Brake Compression Union, 5/8" tube size Brand: IWS Air Brake Compression Union, 5/8" tube size | *$15.29 |
 | Air Brake Hose Assembly 3/8" NPT 1/2" ID 28" Long Brand: IWS Airbrake Assembly Hose 3/8" NPT 1/2" ID 28" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$11.23 |
 | Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 1/4" tube size Brand: IWS Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 1/4" tube size | *$3.43 |
 | Carbon Steel Gear Clamps, Nominal Size 5-1/2" Brand: IWS Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 5-1/2", Min. Size 4.00", Max. Size 6.00", Pack of 10 | *$1.38 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1/2-20" Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 1/2-20", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 10 Per Case | *$9.42 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 3/16" Brand: IWS SAE 100R5 High Temperature Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.13 Lbs., 25 Ft. Per Box | *$10.69 |
 | Spring Loaded T-Bolt Clamp Brand: IWS Spring Loaded T-Bolt Clamp, Min. Size 5.13" Max. Size 5.44", Made From Plated Ductile Iron | *$7.55 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/8-18 Brand: IWS Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/8-18", Hose ID 5/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 10 Per Case | *$8.53 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 4-1/2" Brand: IWS Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 4-1/2", Min. Size 3.00", Max. Size 5.00", Pack of 10 | *$1.76 |
 | Extended Tang Silicone Hose Gear Clamp Brand: IWS Extended Tang (Silicone Hose) Gear Clamp, 3" Nominal Size, 2.56" Min Size, 3.50" Max Size, 10 Per Case | *$2.06 |
 | Ground Plug Valve, Male SAE Flare,1?8" Brand: IWS Ground Plug Valve, Male SAE Flare to Male NPT Pipe Thread, Pipe Size1?8" NPT, Tube Size 1?4" | *$12.06 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/8" Brand: IWS Push-To-Connect Air Brake Fittings, 90 Deg. Female Elbow, Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$7.94 |
 | Air Brake Compression Union Elbow, 1/2" tube size Brand: IWS Air Brake Compression Union Elbow, 1/2" tube size | *$11.96 |
 | Air Brake Hose Assembly 1/4" NPT 3/8" ID 42" Long Brand: IWS Airbrake Assembly Hose 1/4" NPT 3/8" ID 42" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$10.83 |
 | Air Brake Compression Union Tee, 3/8" tube size Brand: IWS Air Brake Compression Union Tee, 3/8" tube size, | *$9.31 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.25" min. Size, 2.56" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.16 |
 | Spring Loaded T-Bolt Clamp Brand: IWS Spring Loaded T-Bolt Clamp, Min. Size 4.38" Max. Size 4.69", Made From Plated Ductile Iron | *$7.35 |
| | Air Brake Sleeve, 3/8" Hose ID Brand: IWS Air Brake Sleeve, 3/8" Hose ID | *$1.86 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 4.31" min. Size, 4.63" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.45 |
 | Air Brake Hose Assembly 3/8" NPT 3/8" ID 26" Long Brand: IWS Airbrake Assembly Hose 3/8" NPT 3/8" ID 26" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.58 |
|