 | Carbon Steel Gear Clamps, Nominal Size 3-1/2"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 3-1/2", Min. Size 3.06", Max. Size 4.00", Pack of 10 | *$1.18 |
 | Spring Loaded T-Bolt Clamp
Brand: IWS
Spring Loaded T-Bolt Clamp, Min. Size 6.25" Max. Size 6.56", Made From Plated Ductile Iron | *$8.04 |
 | Silicone Coolant Hose, 21/4"
Brand: IWS
Silicone Coolant Hose, 2-1/4" ID x 2.62" OD, Working Pressure 40 PSI, 4 Feet Per Case | *$33.53 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 60"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 60" | *$83.33 |
 | Reusable Male Inverted Flare 45 Deg. Elbow Teflon Fitting, Thread Size 5/8-18"
Brand: IWS
Reusable Male Inverted Flare 45 Degree Elbow Teflon Fitting, Thread Size 5/8-18", Hose ID 5/16", Cut-Off Length 0.96" | *$18.82 |
 | Air Brake Hose Assembly 3/8" NPT 1/2" ID 40" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 40" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$13.38 |
 | Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 7/16-20"
Brand: IWS
Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 7/16-20", Hose ID 3/16", Drop Length 0.68" | *$21.18 |
 | Male NPT Fitting With Spring, 1/2" Pipe Size, 1/2" Hose ID
Brand: IWS
Male NPT Fitting With Spring, 1/2" Pipe Size, 1/2" Hose ID | *$18.92 |
| | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling 3 Piece, Thread Size 2-1/2-12
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling 3 Piece, Thread Size 2-1/2-12", Hose ID 1·13/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, This is a three piece style fitting and will require an adapter for assembly, 1 Per Case | *$125.49 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/8", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$3.73 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1-1/4" ID, Pack of 24 | *$3.63 |
| Air Brake Hose Assembly 3/8" NPT 1/2" ID 24" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 24" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$10.63 |
 | Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/4", Hose Size 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$11.96 |
| | gear Clamps
Brand: IWS
Micro Carbon Steel Gear Clamp, 1/4" Nominal Size, 0.22" Min Size, 0.63" Max Size, 10 Per Case | *$0.67 |
| Silicone Coolant Hose, 11/2"
Brand: IWS
Silicone Coolant Hose, 1-1/2" ID x 1.87 OD, Working Pressure 60 PSI, 4 Feet Per Case | *$24.22 |
| | Replacement Brass Sleeve,Hose ID 1/4"
Brand: IWS
Replacement Brass Sleeve,Hose ID 1/4" | *$2.94 |
 | Brass SAE 45 Hydraulic Female Swivel Coupling, Thread Size 7/8-14"
Brand: IWS
Brass SAE 45 Hydraulic Female Swivel Coupling, Thread Size 7/8-14", Hose ID 1/2", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, Three piece style fitting, Require an adapter for assembly, 1 Per Case | *$13.14 |
 | Air Brake Compression Male NPT Run Tee, 1/2" Pipe Size, 5/8" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 1/2" Pipe Size, 5/8" tube size | *$20.89 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 2-1/2-12"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 2-1/2-12", Hose ID 1-13/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$151.27 |
| | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling 3 Piece, Thread Size 1-5/8-12
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling 3 Piece, Thread Size 1-5/8-12", Hose ID 1·1/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, This is a three piece style fitting and will require an adapter for assembly, 2 Per Case | *$41.67 |
 | Heavy Duty Bolt Clamp, 73 mm to 79 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 73 mm to 79 mm, Pack of 10 | *$8.92 |
 | Male NPT Fitting Without Spring, 1/2" Pipe Size, 1/2" Hose ID
Brand: IWS
Male NPT Fitting Without Spring, 1/2" Pipe Size, 1/2" Hose ID | *$14.80 |
 | Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Female NPT Connector, 1/8" Pipe Size, 3/8" tube size | *$5.69 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 5.06" min. Size, 5.38" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.84 |
| | Air Brake Compression Nut, 3/8" Tube size
Brand: IWS
Air Brake Compression Nut, 3/8" Tube size | *$0.69 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 2", Min. Size 1.56", Max. Size 2.50", Pack of 10 | *$1.13 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 2" Nominal Size, 1.56" Min Size, 2.50" Max Size, 10 Per Case | *$1.57 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1-1/2" ID, Pack of 26 | *$3.82 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 24" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 24" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.17 |
 | Reusable Male Inverted Flare, Teflon, Thread Size 5/8-18"
Brand: IWS
Reusable Male Inverted Flare, Teflon, Thread Size 5/8-18", Hose ID 5/16" | *$16.67 |
 | Reusable Hydraulic JIC 37 Deg. Female, 90 Deg. Elbow, Thread Size 1·5/8-12"
Brand: IWS
Reusable Hydraulic JIC 37 Deg. Female, 90 Deg. Elbow, Thread Size 1·5/8-12", Hose ID 1·1/8", Drop Length 2.75", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$92.16 |
 | Rubber Cushioned Support Clamp
Brand: IWS
Rubber Cushioned Support Clamp, Strap Width 1/2", ID1/2", Bolt hole measures 0.256", Galvanized Steel, Fitted With Rubber Liner, Pack of 10 | *$0.54 |
| Heavy Duty Bolt Clamp, 17 mm to 19 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 17 mm to 19 mm, Pack of 10 | *$3.63 |
 | Air Brake Compression Male NPT Connector, 1/2" tube size to 5/8" tube size
Brand: IWS
Air Brake Compression Male NPT Connector, 1/2" tube size to 5/8" tube size | *$9.02 |
| | Air Brake Compression Insert, 1/2" tube size
Brand: IWS
Air Brake Compression Insert, 1/2" tube size, | *$0.70 |
 | Push-To-Connect Air Brake Fittings, Bulkhead Union, Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings, Bulkhead Union, 1/4" x 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.31 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1" ID, Pack of 20 | *$1.86 |
| Air Brake Hose Assembly 1/4" NPT 3/8" ID 26" Long
Brand: IWS
Airbrake Assembly Hose 1/4" NPT 3/8" ID 26" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.89 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18", Hose ID 5/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 10 Per Case | *$7.16 |
| JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18", Hose ID 13/32"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case10 | *$25.40 |
| Heavy Duty Bolt Clamp, 200 mm to 213 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 200 mm to 213 mm, Pack of 10 | *$17.84 |
| Male NPT Fitting Without Spring, 3/8" Pipe Size, 1/2" Hose ID
Brand: IWS
Male NPT Fitting Without Spring, 3/8" Pipe Size, 1/2" Hose ID | *$13.82 |
| Stainless Steel 300 Gear Clamps, Nominal Size 3-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 3-1/2", Min. Size 3.06", Max. Size 4.00", Pack of 10 | *$1.52 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Run Tee,Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings,Swivel Male Run Tee,Pipe Size 3/8", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$25.58 |
| Air Brake Hose Assembly 3/8" NPT 3/8" ID 16" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 3/8" ID 16" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.55 |
 | Air Brake Compression Union Tee, 1/4" tube size
Brand: IWS
Air Brake Compression Union Tee, 1/4" tube size, | *$7.25 |
 | Silicone Heater Hose
Brand: IWS
Silicone Heater Hose, 1/4" ID | *$5.09 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1/2-20"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1/2-20", Hose ID 1/4" | *$11.67 |
| Reusable Hydraulic JIC 37 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-12"
Brand: IWS
Reusable Hydraulic JIC 37 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-12", Hose ID 5/8", Drop Length 1.82", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$35.58 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 48"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 48" | *$73.73 |
|
