 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 48" Brand: IWS SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 48" | *$109.31 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 1/4" Brand: IWS SAE 100R5 High Temperature Hydraulic Hose, ID. 1/4", OD.0.58", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.4", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.16 Lbs., 25 Ft. Per Box | *$12.75 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 3/4-16" Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 3/4-16", Hose ID 1/2", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$37.94 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 15-1/2" Brand: IWS Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 15-1/2", Min. Size 1.75", Max. Size 16.00", Pack of 10 | *$4.91 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 6.75" min. Size, 7.06" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$8.82 |
 | Air Brake Compression Union Elbow, 3/4" tube size Brand: IWS Air Brake Compression Union Elbow, 3/4" tube size | *$33.82 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 13/4" Brand: IWS Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 13/4", Min. Size 1.31", Max. Size 2.25", Pack of 10 | *$1.13 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/4" Brand: IWS Push-To-Connect Air Brake Fittings, 90 Deg. Swivel Male Elbow, Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$6.67 |
 | Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·1/16-12" Brand: IWS Reusable Hydraulic JIC 37 Deg. Female, Long 90 Deg. Elbow, Thread Size 1·1/16-12", Hose ID 5/8", Drop Length 3.73", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$51.76 |
 | Air Brake Compression 90° Male NPT Connector, 3/4" Pipe Size, 5/8" tube size Brand: IWS Air Brake Compression 90° Male NPT Connector, 3/4" Pipe Size, 5/8" tube size | *$18.04 |
 | Silicone Coolant Hose, 11/4" Brand: IWS Silicone Coolant Hose, 1-1/4" ID x 1.62" OD, Working Pressure 65 PSI, 4 Feet Per Case | *$21.08 |
 | Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 3/4-16" Brand: IWS Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 3/4-16", Hose ID 13/32", Drop Length 1.74" | *$45.00 |
| | Replacement Brass Sleeve,Hose ID 5/16" Brand: IWS Replacement Brass Sleeve,Hose ID 5/16" | *$2.75 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18 Brand: IWS Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18", Hose ID 3/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 10 Per Case | *$6.38 |
 | Reusable Hydraulic Male Inverted 45 Degree Elbow Coupling, Thread Size 1/2-20 Brand: IWS Reusable Hydraulic Male Inverted 45 Degree Elbow Coupling, Thread Size 1/2-20", Hose ID 1/4", Drop Length 0.36", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 0 Per Case | *$34.51 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 3.06" min. Size, 3.38" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.35 |
 | Heavy Duty Bolt Clamp, 97 mm to 104 mm Brand: IWS Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 97 mm to 104 mm, Pack of 10 | *$9.80 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 3/4-16" Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 3/4-16", Hose ID 13/32", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 10 Per Case | *$12.65 |
 | Carbon Steel Gear Clamps, Nominal Size 4" Brand: IWS Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 4", Min. Size 2.50", Max. Size 4.50", Pack of 10 | *$1.27 |
 | Heavy Duty Bolt Clamp, 21 mm to 23 mm Brand: IWS Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 21 mm to 23 mm, Pack of 10 | *$3.63 |
 | Heavy Duty Bolt Clamp, 150 mm to 162 mm Brand: IWS Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 150 mm to 162 mm, Pack of 10 | *$16.08 |
 | Air Brake Compression 90° Female NPT Connector, 1/8" Pipe Size, 3/8" tube size Brand: IWS Air Brake Compression 90° Female NPT Connector, 1/8" Pipe Size, 3/8" tube size | *$5.89 |
 | Support Clamp Brand: IWS Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 2" ID, Pack of 30 | *$6.08 |
 | Heavy Duty Heater Hose, ID 5/8" Brand: IWS Heavy Duty Heater Hose, ID 5/8", OD 1.06", Working Pressure 200 PSI @ 100 C - 85 PSI @ 165 C, Black EPDM rubber designed to withstand hot water and low-pressure steam, Reinforcement: Plies of high tensile strength yarn, Temperature Range: -40°C (-40°F) to 165°C | *$6.08 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16" OD. Brand: IWS SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.13 Lbs., Box Package | *$4.02 |
 | Spring Loaded T-Bolt Clamp Brand: IWS Spring Loaded T-Bolt Clamp, Min. Size 5.63" Max. Size 5.94", Made From Plated Ductile Iron | *$7.55 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18" Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$13.53 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/16" Brand: IWS Push-To-Connect Air Brake Fittings, Male, Pipe Size 1/16", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$5.58 |
 | Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/4" Brand: IWS Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/4", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.02 |
 | SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 7/16-20 Brand: IWS SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 7/16-20", Hose ID 5/16" | *$14.02 |
 | Air Brake Plain Nut, 3/8" Hose ID Brand: IWS Air Brake Plain Nut, 3/8" Hose ID | *$2.25 |
 | Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 3/8" tube size Brand: IWS Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 3/8" tube size | *$4.71 |
 | Push-To-Connect Air Brake Fittings, Female, Pipe Size 1/4" Brand: IWS Push-To-Connect Air Brake Fittings, Female, Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications | *$7.25 |
| | Air Brake Compression Insert, 3/8" tube size Brand: IWS Air Brake Compression Insert, 3/8" tube size, | *$0.48 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/8" OD. Brand: IWS SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/8", OD.1.08", Working Pressure 1500 PSI, Min. Burst Pressure 6000 PSI, Min. Bend Radius 6.5", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.40 Lbs., Reel Package | *$7.45 |
 | Carbon Steel Gear Clamps, Nominal Size 6" Brand: IWS Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 6", Min. Size 4.50", Max. Size 6.50", Pack of 10 | *$1.47 |
| | Reusable Male NPT Teflon Fitting, Thread Size 3/8-18" Brand: IWS Reusable Male NPT Teflon Fitting, Thread Size 3/8-18", Hose ID 5/16" | *$15.69 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps Brand: IWS Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 1.50" min. Size, 1.64" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$6.86 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14" Brand: IWS Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14"Hose ID 5/8", Drop Length 3.73"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$41.38 |
 | Air Brake Hose Assembly 3/8" NPT 1/2" ID 48" Long Brand: IWS Airbrake Assembly Hose 3/8" NPT 1/2" ID 48" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$14.91 |
 | Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 3/8" Brand: IWS Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 3/8", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$16.86 |
 | Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 7/16-24" Brand: IWS Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 7/16-24"Hose ID 3/16", Drop Length 1.69"0.39", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$15.69 |
 | Air Brake Spring Guard Nut, 3/8" hose ID Brand: IWS Air Brake Spring Guard Nut, 3/8" hose ID | *$2.16 |
 | Air Brake Compression Male NPT Connector, 3/8" tube size to 1/2" tube size Brand: IWS Air Brake Compression Male NPT Connector, 3/8" tube size to 1/2" tube size | *$4.60 |
 | Male NPT Air Brake Insert 1/2" Pipe Size, 3/8" Hose ID Brand: IWS Male NPT Air Brake Insert 1/2" Pipe Size, 3/8" Hose ID | *$3.04 |
 | Reusable Male Inverted Flare 45 Deg. Elbow Teflon Fitting, Thread Size 1/2-20" Brand: IWS Reusable Male Inverted Flare 45 Degree Elbow Teflon Fitting, Thread Size 1/2-20", Hose ID 1/4", Cut-Off Length 0.96" | *$17.06 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size " Brand: IWS JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size ", Hose ID , Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 5 Per Case | *$25.20 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/8" Brand: IWS Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 1/8", Hose Size 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.91 |
 | Silicone Heater Hose Brand: IWS Silicone Heater Hose, 3/4" ID | *$7.55 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24" Brand: IWS SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24" | *$87.35 |
|