 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14", Hose ID 5/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 5 Per Case | *$20.89 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 23/4" ID, Pack of 33 | *$6.18 |
 | Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size | *$6.27 |
 | Push-To-Connect Air Brake Fittings, Union 3/8
Brand: IWS
Push-To-Connect Air Brake Fittings, Union, Hose Size 3/8" x 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$8.33 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 2-1/4" Nominal Size, 1.81" Min Size, 2.75" Max Size, 10 Per Case | *$1.67 |
 | SAE Stainless-Steel Braided Teflon Hose Hose ID 5/16"
Brand: IWS
SAE Stainless-Steel Braided Teflon Hose Hose ID 5/16", Hose OD 0.44", Working Pressure 2500, Min. Burst Pressure 10000 PSI, Min Bend Radius 4.0", Extruded Teflon, Reinforcement: One high-tensile Type 304 stainless steel wire braid, Temperature Range: -54° to 232°C (-65° to 450°F), Intermittent -73° to 260°C (-100° to 500°F)0.11 Lbs. Per Ft. | *$5.69 |
 | Carbon Steel Gear Clamps, Nominal Size 1-1/4"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 1-1/4", Min. Size 0.75", Max. Size 1.75", Pack of 10 | *$0.85 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2", OD.0.92", Working Pressure 1750 PSI, Min. Burst Pressure 7000 PSI, Min. Bend Radius 5.5", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.38 Lbs., Reel Package | *$6.38 |
 | Silicone Coolant Hose, 23/4"
Brand: IWS
Silicone Coolant Hose, 2-3/4" ID x 3.12" OD, Working Pressure 30 PSI, 4 Feet Per Case | *$38.82 |
 | Air Brake Compression 45° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size | *$8.04 |
 | Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 3/8" tube size | *$6.76 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1-1/16-14"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1·1/16-14", Hose ID 5/8" | *$34.80 |
| | gear Clamps
Brand: IWS
Micro Carbon Steel Gear Clamp, 1-1/2" Nominal Size, 1.31" Min Size, 2.00' Max Size, 10 Per Case | *$0.83 |
 | Spring Loaded T-Bolt Clamp
Brand: IWS
Spring Loaded T-Bolt Clamp, Min. Size 4.13" Max. Size 4.44", Made From Plated Ductile Iron | *$7.35 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 48"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-12, Length 48" | *$125.20 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Union,5/32"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Union, 5/32" x 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$7.25 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 1.63" min. Size, 1.88" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$6.86 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 7/16" ID, Pack of 12 | *$2.35 |
 | Ground Plug Valve, Female1?8"
Brand: IWS
Ground Plug Valve, Female, Pipe Size1?8" NPT | *$16.86 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 5/8"
Brand: IWS
SAE 100R5 High Temperature Hydraulic Hose, ID. 5/8", OD.1.08", Working Pressure 1500 PSI, Min. Burst Pressure 6000 PSI, Min. Bend Radius 6.5", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.46 Lbs., 25 Ft. Per Box | *$22.06 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 5/8" ID, Pack of 15 | *$1.08 |
 | Air Brake Compression Union Tee, 3/4" tube size
Brand: IWS
Air Brake Compression Union Tee, 3/4" tube size, | *$52.45 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 24"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 24" | *$54.42 |
| | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 3/8" Nominal Size, 0.56" Min Size, 0.88" Max Size, 10 Per Case | *$1.18 |
| | Stainless Steel 301 Gear Clamps, Nominal Size 5?16"
Brand: IWS
Stainless Steel 301 Gear Clamps, Band Width 5/16", Nominal Size 5?16", Min. Size 0.43", Max. Size 0.71", Pack of 10 | *$0.91 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.88" min. Size, 3.19" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.35 |
| | Replacement Brass Sleeve,Hose ID 1/2"
Brand: IWS
Replacement Brass Sleeve,Hose ID 1/2" | *$1.92 |
| Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 1/2" Pipe Size, 1/2" tube size | *$11.76 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.63" min. Size, 2.94" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.35 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.13 Lbs., Reel Package | *$4.02 |
| Air Brake Compression Union Elbow, 1/4" tube size
Brand: IWS
Air Brake Compression Union Elbow, 1/4" tube size | *$4.91 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14", Hose ID 1/2", Drop Length 1.23", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 5 Per Pack | *$38.24 |
 | SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 1-1/16-14
Brand: IWS
SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 1-1/16-14", Hose ID 5/8", 5 Per case | *$28.04 |
| | Air Brake Compression Insert, 1/8" tube size
Brand: IWS
Air Brake Compression Insert, 1/8" tube size, | *$1.18 |
 | Silicone Heater Hose
Brand: IWS
Silicone Heater Hose, 3/8" ID | *$5.89 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 6.00" min. Size, 6.31" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$8.04 |
| Carbon Steel Gear Clamps, Nominal Size 5"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 5", Min. Size 3.50", Max. Size 5.50", Pack of 10 | *$1.38 |
 | Heavy Duty Bolt Clamp, 55 mm to 59 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 55 mm to 59 mm, Pack of 10 | *$6.38 |
 | Heavy Duty Heater Hose, ID 3/4"
Brand: IWS
Heavy Duty Heater Hose, ID 3/4", OD 1.18", Working Pressure 200 PSI @ 100 C - 85 PSI @ 165 C, Black EPDM rubber designed to withstand hot water and low-pressure steam, Reinforcement: Plies of high tensile strength yarn, Temperature Range: -40°C (-40°F) to 165°C | *$6.76 |
| SAE Stainless-Steel Braided Teflon Hose Hose ID 3/16"
Brand: IWS
SAE Stainless-Steel Braided Teflon Hose Hose ID 3/16", Hose OD 0.30", Working Pressure 3000, Min. Burst Pressure 12000 PSI, Min Bend Radius 2.0", Extruded Teflon, Reinforcement: One high-tensile Type 304 stainless steel wire braid, Temperature Range: -54° to 232°C (-65° to 450°F), Intermittent -73° to 260°C (-100° to 500°F), 0.08 Lbs. Per Ft. | *$4.31 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 3.38" min. Size, 3.69" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.35 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1-13/16" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1-13/16", OD.2.22", Working Pressure 350 PSI, Min. Burst Pressure 1400 PSI, Min. Bend Radius 13.2", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.82 Lbs. | *$18.92 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 36"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 36" | *$64.02 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 5-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 5-1/2", Min. Size 4.00", Max. Size 6.00", Pack of 10 | *$1.96 |
 | Air Brake Compression 90° Female NPT Connector, 1/4" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 90° Female NPT Connector, 1/4" Pipe Size, 3/8" tube size | *$5.49 |
 | Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 5/8-18"
Brand: IWS
Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 5/8-18", Hose ID 5/16", Drop Length 0.85" | *$18.92 |
 | Rubber Cushioned Support Clamp
Brand: IWS
Rubber Cushioned Support Clamp, Strap Width 1/2", ID11/4", Bolt hole measures 0.256", Galvanized Steel, Fitted With Rubber Liner, Pack of 10 | *$1.67 |
| Heavy Duty Bolt Clamp, 174 mm to 187 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 174 mm to 187 mm, Pack of 10 | *$17.06 |
| Heavy Duty Bolt Clamp, 27 mm to 29 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 27 mm to 29 mm, Pack of 10 | *$3.82 |
 | Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 5/8-18"
Brand: IWS
Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 5/8-18"Hose ID 5/16", Drop Length 1.73"1.07", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$19.31 |
|
